Справочник Пользователя для KYOCERA Finecam L3

You don't have to pay attention to the battery capacity if you use this adapter to do a long 
playback or connect a PC. 

Connecting AC Adapter AC-74L

● Prolonged use may cause the AC adapter to feel warm; this is a normal phenomenon and not a 

malfunction.

● When not using the AC adapter for an extended period of time, first remove the plug from the camera body, 

then disconnect the adapter from its AC outlet.

● If you wish to use the AC adapter while batteries are loaded in the camera, first set the camera's power 

switch to OFF, then connect the AC adapter before turning on the camera again.

● The AC adapter has been designed for exclusive use with this camera. To prevent the danger of fire and 

electrical shock, do not use the adapter with products other than the specific digital camera for which it 
was designed.

● Be sure that AC adapter plug is connected securely before use. Loose plugs and poor 

contacts can cause generation of heat, fire, and electrical shock.

● Do not attempt to modify the AC adapter's cords, or subject them to unreasonable 

force. Damage to the cords can cause fires and electrical shock. If cords become so 
damaged that their wire cores are exposed, discontinue using them and consult your 
dealer or Kyocera/Yashica Service Center.

● Do not attempt to remove covers, disassemble, repair or modify your AC adapter, since 

dangerous electrical shock could result.

● AC adapters that have become laden with dirt or household dust should not be used or 

approached with metal objects, since electricity might be transmitted through the 
metal, causing fire or personal electrical shock. In the event of heavy soiling of a plug, 
remove it from its outlet and clean away the dirt before reusing.

● In the event that an AC adapter plug emits smoke or unusual smell or sound, or if it is 

damaged by impact or falling, cease use immediately. Continuing to use a damaged 
plug could result in fire danger. In the event of damage to a plug, consult your dealer or 
Kyocera/Yashica Service Center.

● Do not connect the AC adapter to any sources of power other than a household AC 

outlet (AC 100V to 240 V; 50/60Hz). Using the adapter with other voltages or ratings 
may cause the hazard of fire or electrical shock.

● Use the designated AC adapter. Using other adapters may result in unexpected 

accidents and fire danger.

● Never attempt to splice the AC adapter cord, or subject it to severe twisting, bending, 

or stretching.

● Do not handle the AC adapter with wet hands, since personal electrical shock could 

result.

● Always grasp the plug body (not cord) when removing the AC adapter plugs from 

camera and power outlet. Pulling on the cords could cause breakage or other damage 
to the wires, resulting in danger of fire or electrical shock.

● If you observe any damage to the AC adapter, including broken wires and faulty plug 

contacts, discontinue using the AC adapter and consult your dealer Kyocera/Yashica 
Service Center.

00_8CQ.book  Page 102  Wednesday, May 14, 2003  8:10 PM