Справочник Пользователя для KYOCERA Finecam L4
Using Playback “p” Mode Functions
70
p
[PROTECT] Protecting Images from being Erased
Important images can be protected against accidental erasure.
● You cannot use this operation while the SD memory card is write-protected. For write protect,
see page 15.
To protect images
1
1
Turn on the power and set the mode select dial to “p”.
6
Press the MENU button to finish the operation.
● The protected images will not be erased even if [ERASE ALL] is executed, but they will
be erased when the memory card is formatted.
[ERASE] Erasing Individual Images
● Use caution when erasing an image. You cannot restore the erased image.
● The protected images cannot be erased. (page 70)
● You cannot use this operation while the SD memory card is write-protected. For write protect,
● The protected images cannot be erased. (page 70)
● You cannot use this operation while the SD memory card is write-protected. For write protect,
see page 15.
To Erase an Image
1
1
Turn on the power and set the mode select dial to “p”.
2
Press the MENU button to display the menu icons.
3
Press Left or Right on the directional keypad to
select
select
[PROTECT], then press the e button.
4
Press Left or Right on the directional keypad to
select the image you wish to protect.
select the image you wish to protect.
5
Select [SET] and press the e button to protect the
image.
image.
● To protect other images, repeat steps 4 and 5.
2
Press the MENU button to display the menu icons.
PROTECT
PROTECTION?
SET
RETURN
ERASE ALL
00_8CQ.book Page 70 Wednesday, May 14, 2003 8:10 PM