Справочник Пользователя для Microsoft 10.1

 

125 

• The [Scan] button is pressed, but scanning is not performed.  

Cause: 

Has the scanner power been turned on?  Has the SCSI cable been 
connected correctly?  Has the correct device type been selected using 
[Select TWAIN Input Device]? 

 

• The scanner appears to be operating, but no image is displayed.  

Cause: 

Has the SCSI/USB cable between the scanner and the main unit been 
connected correctly? 

Is the [Brightness] value or [Threshold] value too small?  

Does the image appear after minimizing and restoring the window?  

Is the application set to perform only file output? 

Resolution: 

If the [Restore] button is displayed after the [Minimize] button is 
pressed, the problem could be the display driver that is being used.  
Contact the manufacturer of the display driver. 

If a file has been selected as output destination with the environment 
settings by the image scanner operation confirmation utility, try to 
change to screen output. 

 

• When you don’t know how to replace consumables. 

Resolution: 

See the Operator’s guide.