Листовка для Viewsonic DPG807

Insert your camera memory 

card into the appropriate slot.

Select the menu key on the touch 

pad to open the main menu. 

Select the device from which you are 

transferring images and press the select key 

on the touch frame.

Select the FILE mode.

Scroll through the files by 

using the up and down 

arrows. Select the desired file 

by touching the right arrow 

key on the touch frame. 

Hold the menu key on the 

touch frame to open the 

internal memory sub-window. 

Then using the select key, 

choose the COPY function.

Choose NAND by right 

arrow key.

Press the select key to start 

the copy process. File copy 

is complete when you see 

“Finished.”

DPF_QSG_DPG807-1W_2W Rev.1A 09-08-08

Copyright © 2008 ViewSonic Corporation.  All rights reserved.

Connect the small end of the 

USB cable to the USB port on 

the digital frame.

Connect the larger end of the 

USB cable to the USB port on 

your computer.

Double-click on the appropriate 

driver letter to access the internal 

memory.

Open the folder on your computer 

that contains the images you wish 

to copy to the frame.

Drag and drop the file you se-

lected to the photo frame drive. 

Repeat until you have copied all 

desired images to the frame.

Some computers may 

not recognize the exter-

nal device on the first 

try. If after a few minutes, the 

external drivers are not seen, 

unplug the USB cable, turn the 

photo frame off and then back 

on. Repeat steps one and two.

Five new driver letters 

will appear under the 

“My Computer” icon in 

windows.  Each one represents 

the available card slots on the 

digital photo frame. The first 

driver is for internal memory. 

 The touch frame 

function buttons will not oper-

ate when connected to a PC 

through the USB cable. Dis-

connect the USB cable before 

operating the touch frame 

buttons.

ViewSonic service website: http://www.ViewSonic.com/support/

Toll free number: US (800) 688-6688, Canada (866) 463-4775