Справочник Пользователя для Panasonic AG-HVX200AP

the   button.
•  In the following example, TITLE 1 is the 

filename. (To change the filename, see the 
description below.)

•  When writing is completed, WRITE OK 

appears.

 

 

 

 

 

 

 

 

To load a file
1) Perform steps 

1 to 3, select READ in step 4, 

and press the   button.

 

When reading is completed, READ OK 
appears.

To title a file
1) Perform steps 

1 to 4.

2)  Select the first character in the title using the   

and   buttons, and press the   button. (The 
next character can now be selected.)
•  You can input any of the following characters:  

Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./

•  You can erase all characters using the 

RESET button on the camera or the remote 
control.

3)  After entering all the characters, press the 

button at the left end (or the

   button at the 

right end) of the characters, and then press the 

 button.

To reload a file from an SD memory card
1) Perform steps 

1 and 2.

2) Use the   and   buttons to move to TITLE 

RELOAD, display YES, and then press the   
button.

 

The file reloads.

•  If WRITE NG FORMAT ERROR appears, format 

the SD memory card. (Page 32)

•  If WRITE NG WRITE PROTECT appears, 

release the protected status of the SD memory 
card.

•  If WRITE NG CANNOT ACCESS appears, quit 

all other operations (such as playback) before 
proceeding.

•  If WRITE NG ERROR appears, the SD memory 

card may be defective. Replace it.

You can save up to four scene file settings or other 
settings as files on an SD memory card, and you 
can also load them from the card.
•  In the case of the scene files, the current settings 

are automatically saved in the unit, and the saved 
data is written on an SD memory card. When 
data has been read from an SD memory card, 
the current settings are rewritten at the same 
time as the data saved inside the unit.

•  The data in all the scene files, F1 to F6, is 

rewritten.

•  Insert the SD memory card into the unit. Set the 

MEDIA switch to the P2 position. (Pages 25 and 
32)

If you have saved a scene file

CARD FUNCTIONS screen, select YES, and 
press the   (or   ) button.
For all other settings, select USER FILE.
•  For menu operations (Page 97) 
•  You can also use the menu buttons on the 

remote control. (Page 15)

SCENE FILE