Справочник Пользователя для Panasonic AWRP120GJ

13

The preset memory of a remote camera can be operated from the unit.

The following settings that you have adjusted in advance can be stored 

in preset memory.

 

z

Pan/tilt positions

 

z

Zoom positions

 

z

Focus positions

 

z

Lens iris settings (manual iris only)

 

z

White balance settings

 

z

If the MEM ENABLE button indicator is off, preset memory 

operation is not possible. Press the button to turn on its indicator 

and then perform operation.

 

z

Preset numbers PMEM 1 to 10 are also used as start positions 

when recalling tracing memory. Preset data may be overwritten or 

deleted by tracing memory operation.

 

z

The number of preset memory and data that can be registered 

differ depending on the remote camera.  

For details, check the operating instructions for the corresponding 

model.

 

z

Press one of the number buttons [1] to [50] to directly select any of the 

50 preset memory.

Furthermore, pressing the PMEM PAGE button to change pages allows 

you to operate up to 100 preset memory for each camera.

Button indicator on

Button indicator on

PMEM 1 to PMEM 50

Page 1

[1] to [50]

PMEM 51 to PMEM 100

Page 2

Example: When specifying preset number “PMEM 51”

1. Press the PMEM page button to select Page 2.

2. Press number button [1].

 

z

The lighting method of the number buttons differs depending on the 

remote camera or pan-tilt head that the unit is controlling.

AW-HE50, AW-HE60, 

AW-HE120

The indicators of the number buttons with 

preset memory registered turn on.

AW-HE100, AW-PH360, 

AW-PH405, AW-PH650, 

AW-PH400

The indicator of the number button that 

was last pressed turns on.

However, when preset memory is deleted 

in DELETE mode, all of the number 

buttons turn off.