Справочник Пользователя для Panasonic AWRP120GJ

36

The unit allows you to use a memory card to perform the following 

operations.

SAVE : Save the configuration data of the unit or a remote camera to a 

memory card.

LOAD : Load the configuration data saved to a memory card to the unit 

or a remote camera.

SETUP

Configuration data 

of unit

RP01.s12 to  

RP99.s12

SAVE and 

LOAD

MEM

Preset data and 

tracing data

RP01.m12 to  

RP99.m12

SAVE and 

LOAD

CAM

Configuration data 

of remote camera

RP01.c12 to  

RP99.c12

SAVE and 

LOAD

UPGRADE

Unit version update 

file

V*****.s12 to  

V*****.s12

LOAD only

LOG

Unit operation log

RP01.log to  

RP99.log

SAVE only

*1 : When SAVE is executed on the unit, the file names above are 

assigned automatically.

Also, after SAVE is executed on the unit, the file names can be 

changed with a personal computer.

· About file names

  SETUP: ********.s12

  MEM: ********.m12

  CAM: ********.c12

Use up to eight single-byte alphanumeric characters for the ******** 

part above. A file name other than the above may not be displayed 

properly on the unit. 

*2 : The IP address, subnet mask, and default gateway settings of the 

unit are not target for the SAVE and LOAD operations.

*3 : Only the data for the selected remote camera.

The PRESET SPEED value set for each preset is loaded and 

saved.

*4 : Only the data for the selected remote camera.

 

z

SAVE and LOAD are not possible with the MEM and CAM items 

of a camera connected via a serial connection.

 

z

Never remove a memory card while the memory card access lamp 

is lit or blinking.  

If you remove a memory card while the memory card access lamp is 

lit or blinking, the data saved to the memory card may be lost.

 

z

The data stored in a memory card may be lost due to, for example, 

the loss or incorrect operation of the memory card.  

We recommend saving any important data to a computer or other 

device.

 

z

Memory cards used with the unit should conform to SD or SDHC 

standards.

Be sure to use the unit to format memory cards.

Memory cards with the following capacity can be used with the 

unit.

SDXC memory cards and MultiMediaCards (MMC) are not 

supported.

8 MB to 2 GB

SDHC 4 GB to 32 GB

For the latest information not described in the Operating 

Instructions, refer to the following websites.

(Japanese) http://panasonic.biz/sav/

(English) http://pro-av.panasonic.net/

 

z

Observe the following points when using and storing the 

memory cards.