Справочник Пользователя для Sony aws-g500
C
h
h
a
p
ter
3
O
p
p
er
at
io
ns
186
Streaming
Configuring the Network Settings
With the network environment set up, make the network settings for this unit.
Ask your network administrator for further information about your network.
Ask your network administrator for further information about your network.
1
Connect a network cable to the NETWORK connector of this unit.
In order to meet EMC standards, use an STP (shielded twisted pair) type
Ethernet cable.
Ethernet cable.
2
Press the MENU button.
3
In the top menu, select [Network].
4
Set the following items in the submenu.
Entering the host name
1
Select [Host Name], and confirm; 2 enter the host name in the input box,
and confirm.
Setting the IP address
1
Select [IP Setting], and confirm; 2 make a selection, and confirm.
[Off]:
if IP address not set
[DHCP]:
if address automatically obtained from DHCP server
[Manual]:
to input address manually
When [Manual] is selected, enter the following items, and confirm.
Input the default gateway if required.
Input the default gateway if required.
[IP Address]:
Enter the IP address.
[Subnet Mask]:
Enter the subnet mask.
[Default Gateway]:
Enter the default gateway address.
Because the unit uses “172.27.72.0 netmask 255.255.255.0” internally, the
unit will not operate correctly if settings are configured to include
“172.27.72.0 netmask 255.255.255.0”.
unit will not operate correctly if settings are configured to include
“172.27.72.0 netmask 255.255.255.0”.
Caution
Caution
Apply
Host Name
IP Setting
DHCP
DNS Setting
DHCP
MAC Address
[
XXXXXXXXXX
]
Not more than 15 characters
The first character must be a letter.
The first character must be a letter.
1
2
Apply
Host Name
IP Setting
DHCP
DNS Setting
DHCP
MAC Address
Off
DHCP
Manual
IP Address
Subnet Mask
Default Gateway
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
1
2