Руководство Пользователя для Panasonic SDRH85K
94
VQT2L14
With a PC
Setup
2
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
adaptor.
≥ It is possible to use the unit connected to
the PC with the batteries only, but you will
not be able to write data into the unit.
not be able to write data into the unit.
≥ Use the AC adapter to free you from
worrying about the battery running down.
2
Turn on the unit.
≥ This function is available in all modes.
≥ When using the battery, the LCD monitor
≥ When using the battery, the LCD monitor
will be turned off after about 5 seconds.
Operating the joystick will cause the LCD
monitor to turn on again.
Operating the joystick will cause the LCD
monitor to turn on again.
3
Connect this unit to a PC.
≥ Insert the USB connectors as far as they
will go.
≥ Do not use any other USB cables except
the supplied one. (Operation is not
guaranteed with any other USB cables.)
guaranteed with any other USB cables.)
≥ The Smart wizard screen is automatically
displayed when VideoCam Suite 3.0 is
installed.
installed.
≥ This unit is automatically recognized as an
external drive of the PC. (
l 96)
≥ A USB function selection screen will be
displayed if VideoCam Suite 3.0 has not
been installed. Use the joystick to select
[PC], then press the center of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
been installed. Use the joystick to select
[PC], then press the center of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
≥ When Windows is used as the PC
operating system, a message prompting
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
≥ When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before
turning this unit off.
Disconnect the USB cable, before
turning this unit off.
≥ Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
card access icon (
card access icon (
) appears on the
unit screen.
≥
/
Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
built-in memory access icon (
AC adaptor while the access lamp is on or
built-in memory access icon (
)
appears on the unit screen.
≥
Do not disconnect the USB cable or the
AC adaptor while the HDD access lamp is
on or HDD access icon (
AC adaptor while the HDD access lamp is
on or HDD access icon (
) appears on
the unit screen.
≥ When performing reading/writing between a
PC and an SD card, be aware that some SD
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 94 ページ ２００９年１２月２２日 火曜日 午前１０時３３分