Справочник Пользователя для Panasonic NV GS 330
With a PC
55
VQT1L48
≥When you use Windows 2000 (SP4) to connect
the personal computer and the movie camera
by USB cable and then use MotionDV STUDIO,
installing the USB driver is needed.
by USB cable and then use MotionDV STUDIO,
installing the USB driver is needed.
1
Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
personal computer’s CD-ROM drive.
≥Quit all applications.
≥The [Setup Menu] screen appears.
≥The [Setup Menu] screen appears.
2
Click [MotionDV STUDIO 6.0E LE].
≥After reading the displayed contents, please
carry out the installation according to
instructions.
instructions.
3
Select the video system.
4
After the completion of setup, click on
[Finish].
[Finish].
≥Sample data is installed concurrently with the
MotionDV STUDIO.
≥After installation, if you click [MotionDV
STUDIO 6.0E LE] in the Setup Menu, the
uninstallation starts. Click [EXIT] in the
Setup Menu to close the Setup Menu.
uninstallation starts. Click [EXIT] in the
Setup Menu to close the Setup Menu.
ª
Connecting the movie camera to
personal computer
personal computer
Confirmation before connection
When you connect the personal computer and the
movie camera with the USB cable and then use
SweetMovieLife/MotionDV STUDIO on Windows
When you connect the personal computer and the
movie camera with the USB cable and then use
SweetMovieLife/MotionDV STUDIO on Windows
Vista, Windows XP (SP2) or Windows 2000
(SP4), check the driver of the USB host controller.
≥It is required to use the driver for which
(SP4), check the driver of the USB host controller.
≥It is required to use the driver for which
[Microsoft] is displayed on [Driver Provider]
in [Driver] tab.
in [Driver] tab.
(for Windows XP/2000)
1
Select [start] >> [Settings] >> [Control
Panel] to start [System].
≥[System Properties] is displayed.
Panel] to start [System].
≥[System Properties] is displayed.
2
Click [Hardware] tab and then click [Device
Manager].
Manager].
3
Right-click [Enhanced Host Controller] etc.
in [Device Manager] and then select
[Properties].
in [Device Manager] and then select
[Properties].
≥The indication [Enhanced Host Controller] is
changed as [EHCI] depending on the host
controller you use.
controller you use.
4
Click [Driver] tab to check the description
on [Driver Provider].
on [Driver Provider].
≥If [Microsoft] is displayed on [Driver Provider],
the confirmation procedure is completed.
(for Windows Vista)
1
Select [start] >> [Control Panel] >> [System
and Maintenance] to start [Device Manager].
and Maintenance] to start [Device Manager].
2
Right-click [Enhanced Host Controller] etc.
in [Device Manager] and then select
[Properties].
in [Device Manager] and then select
[Properties].
≥The indication [Enhanced Host Controller] is
changed as [EHCI] depending on the host
controller you use.
controller you use.
3
Click [Driver] tab to check the description
on [Driver Provider].
on [Driver Provider].
VQT1L48_ENG.book 55 ページ ２００７年１２月１１日 火曜日 午後４時５５分