Справочник Пользователя для Panasonic PV-GS300
Edit mode
49
LSQT0974
ª
When neither image nor sound from
the Camcorder is output to the TV set
the Camcorder is output to the TV set
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
)
≥Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional)
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional)
1, high-
image-quality dubbing can be done in digital
format.
≥Set to Tape Playback Mode.
format.
≥Set to Tape Playback Mode.
(Player/recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
equipment with the DV cable.
2
Set [ADVANCED] >> [REC STDBY] >> [YES].
(Recorder)
(Recorder)
≥You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
When operating with the main unit:
Move the joystick up to select [
When operating with the main unit:
Move the joystick up to select [
¥
/
;
] icon.
When operating with the remote control:
While pressing the [
While pressing the [
¥
REC] button on the
remote control, press the [PLAY
1] button.
5
Move the joystick up to select the [
¥
/
;
]
icon again or press the [
;
] button on the
remote control to stop recording.
(Recorder)
(Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the Camcorder is standby for recording,
move the joystick down and select the [
move the joystick down and select the [
∫] icon or
press the [
∫] button on the remote control.
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by mosaic-
like patterns at playback.
Camcorder, the picture is distorted by mosaic-
like patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
recorded while it is connected with the USB
cable.
≥While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joy stick.
appearing from the side of the screen when you
press the center of the joy stick.
≥While pictures are input from the DV terminal,
the TV aspect will not change even if you
change the setting for [TV ASPECT] in the
[SETUP] menu.
change the setting for [TV ASPECT] in the
[SETUP] menu.
1
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
LSQT0974_ENG.book 49 ページ ２００５年１１月７日 月曜日 午前１１時５８分