Справочник Пользователя для Panasonic PV-GS300

Скачать
Страница из 88
Others
74
LSQT0974
ª
About the AC adaptor
≥If the battery is warm, charging requires more 
time than normal.
≥If the temperature of the battery is extremely 
high or extremely low, the [CHARGE] lamp may 
continue flashing, and the battery may not be 
charged. After the battery temperature has 
decreased or increased sufficiently, recharging 
starts automatically. So, wait for a while. If the 
lamp still continues flashing even after the 
recharging, the battery or AC adaptor may be 
faulty. If so, please contact a dealer.
≥If you use the AC adaptor near a radio, radio 
reception may be disturbed. Keep the AC 
adaptor 1 meter (3 feet) or more away from 
radio.
≥When using the AC adaptor, it may generate 
whirring sounds. However, this is normal.
≥After use, be sure to pull out the AC Cable from 
the AC Jack. (If they are left connected, a 
minute amount of current is consumed.) 
≥Always keep the electrodes of the AC adaptor 
and battery clean.
ª
About the cassette
Never place the cassette in a high temperature 
place.
≥The tape may be damaged, producing 
mosaic-like noise at the time of playback.
When storing the cassette after use, be sure 
to rewind the tape to the beginning and take it 
out. 
≥If the cassette is left for more than 6 months 
(depending on the storage condition) in the 
Camcorder or stopped midway, the tape may 
sag and be damaged.
≥Once every 6 months, wind the tape to the end 
and then rewind it to the beginning. If the 
cassette is left for 1 year or longer without 
winding or rewinding, the tape may be deformed 
by expansion or shrinkage attributable to 
temperature and humidity. The wound tape may 
stick to itself.
≥Dust, direct sunlight (ultraviolet rays), and 
humidity may damage the tape. Such usage 
may cause damage to the Camcorder and the 
heads.
≥After use, be sure to rewind the tape to the 
beginning, put the cassette in the case to 
protect it from dust, and store it upright.
Keep the cassette away from strong 
magnetism.
≥Apparatus using magnets such as magnetic 
necklaces and toys have magnetic force that is 
stronger than expected, and they may erase the 
contents of a recording or may increase noise.
ª
About the card
When inserting or removing the card, always 
set the [OFF/ON] switch to [OFF].
When the access lamp is illuminated (During 
access to the card), do not pull out the card, 
rotate the mode dial, turn off the power, or 
cause any vibrations or impact. 
Do not leave the card in places where there is 
high temperature or direct sunlight, or where 
electromagnetic waves or static electricity are 
easily generated. Moreover, do not fold or 
drop the card.
≥The card may break or the contents of the card 
may be destroyed or erased.
After use, be sure to remove the card from the 
Camcorder for storage.
≥After use, or when storing or carrying the card, 
put it in the storage case.
≥Do not allow dust, water, or foreign substances 
to adhere to the terminals on the back of the 
card. Moreover, do not touch the terminals with 
your hand.
≥Keep the Memory Card out of reach of children 
to prevent swallowing.
ª
Folder structure of the card
The folder structure of the card formatted by 
the Camcorder will be displayed on the PC as 
the illustration below.
≥Up to 999 pictures can be recorded on 
100CDPFP folder etc.
≥Files with the DPOF settings can be recorded 
on MISC folder.
256
LSQT0974_ENG.book  74 ページ  2005年11月7日 月曜日 午前11時58分