Справочник Пользователя для Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0

•

Measured depth may not be accurate when pressure is applied to front or rear of this unit by 

pressing with your hands, etc. In such a case, it is recommended to perform [Depth indicator] 

again when you get back to the surface.

•

The display may differ significantly depending on the weather conditions (atmospheric 

pressure, air temperature), or seawater temperature.

•

For more accurate depth measurements, we recommend that you perform [Depth indicator] 

before you dive underwater.

•

When the unit is wet immediately after coming out of the water, etc., it may not be able to 

measure atmospheric pressure accurately. For details, read 

.

•

To prevent water leakage, make sure that there are no foreign objects, such as sand, hair, dust, 

etc., clamped and close the side door all the way until it clicks. Also, read 

 before using the 

camera.

•

Dip the camera in fresh water in a shallow container for 10 minutes or less after using it, then 

wipe the water off with a soft, dry cloth.