Справочник Пользователя для Panasonic DMC-FX150

VQT1S88

•

The ends of the recorded pictures may be cut at printing so check before printing. (P117)

For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the 
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes: 

³

•

Depending on the brightness and how fast the subject is moving, jitter may not be avoided.

•

Movements may not be detected when a moving subject is small, when a moving subject is at 
the edge of the screen or when a subject has moved at the very moment when the shutter 
button was pressed fully.

•

When [INTELLIGENT ISO] is [ON], the maximum ISO sensitivity is limited to the value set in 
[ISO LIMIT SET]. When [ISO LIMIT SET] is set to [AUTO], the ISO limit is set automatically up 
to a maximum of [ISO800].

For details on [REC] mode menu settings, refer to P18.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure 
enables pictures to be taken even in dark places without the resulting pictures coming out 
dark.
Applicable modes: 

³²

•

When setting to [AUTO], ISO sensitivity is automatically adjusted to the maximum of the value 
set in [ISO LIMIT SET] (excluding [AUTO]).

•

The setting is not available when [INTELLIGENT ISO] is being used. ([

] is displayed.)

•

If picture noise becomes a problem, we recommend that you take pictures after lowering the 
maximum ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under 
[PICT.ADJ.], or lowering the setting for each of the items other than [NOISE REDUCTION]. 
(P72)

[X]

[Y]

[W]

 [INTELLIGENT ISO]

> [SENSITIVITY]

Recording location 
(recommended)

When it is light (outdoors)

When it is dark

Shutter speed

Slow

Fast

Noise

Less

Increased

DMCFX150-VQT1S88_mst.book  63 ページ  ２００８年７月９日　水曜日　午後８時１８分