Справочник Пользователя для Panasonic DMC-LX100

300

SQW0021

Others

Message displays

■

 •Use a genuine Panasonic battery.

 •Battery cannot be recognized as terminal is dirty.

→  Wipe any dirt away from the battery terminal.

■

 •Check following regarding the wireless access point.

→  The wireless access point information set on this unit is wrong. Check the authentication type, 

encryption type, and encryption key. 

→  Power of the wireless access point is not turned on.

→  Setting of the wireless access point is not supported by this unit.

 •Check the network setting of the destination.

 •Radio waves from other devices may block the connection to a wireless access point. 

→  Check other devices that are connected to the wireless access point and devices that use the 

2.4 GHz band.

 •This is displayed when there is no image to transmit due to the restriction of the destination. 

Check the file type of the image to transmit. 

 •Radio waves from the wireless access point are getting weak. 

→  Perform the connection closer to the wireless access point.

 •There is no reply from the server or it has exceeded the communication processing time. 

→  Try again after a while.

 •Depending on the wireless access point, connection may be automatically disconnected after 

specific time has passed. 

→  Reconnect the connection again.

 •Devices that download images from a cloud folder are not registered.

 •Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a 

smartphone with “Image App”. For details on [Cloud Sync. Service], refer to 

.

 •Check following regarding the smartphones you intend to connect.

→  The smartphone does not operate.

→  Change the access point to connect to in the smartphone Wi-Fi settings to this camera.

→  There is no free storage space on the smartphone.