Справочник Пользователя для Panasonic DMC-LX100

Скачать
Страница из 332
87
SQW0021
Recording mode
Taking pictures after setting the aperture value and shutter speed
Manual exposure assist (estimate)
Shows pictures with standard brightness (appropriate exposure).
Shows brighter pictures. For the appropriate exposure, either use a faster shutter 
speed or increase aperture value.
Shows darker pictures. For the appropriate exposure, either use a slower shutter 
speed or reduce aperture value.
About T (time)
When you set the shutter speed to T (time) and fully press the shutter button, the shutter 
opens. (Approximately up to 120 seconds)
When you press the shutter button again, the shutter closes. Use this function when you 
want to keep the shutter open for an extended period, for example, to record pictures of 
fireworks or night scenes.
 •When you take pictures with the shutter speed set to T (time), make sure to use a fully 
charged battery 
.
 •Manual exposure assist is not displayed.
 •If you set the shutter speed to T (time) when [Sensitivity] is set to [AUTO], [Sensitivity] 
will change to [200].
 •You cannot use this function when the electronic shutter is used.
 •You can use this function only in [Manual Exposure] Mode.
 
When you take pictures with the shutter speed set to T (time), we recommend 
using remote recording with a tripod or smartphone as a remote shutter release 
, in order to prevent jitter.
 
When you take still pictures with the shutter speed set to T (time), the pictures 
may have higher noise levels. If you want to suppress noise, we recommend 
taking pictures by setting [Long Shtr NR] to [ON] in the [Rec] menu. 
Enabling/disabling the preview of the selected aperture value and 
shutter speed effects on the recording screen
 →   [Custom] → [Constant Preview] (M Mode) → [ON] / [OFF]
 
This function is disabled when the flash is used.
 
You can use this function only in [Manual Exposure] Mode.