Справочник Пользователя для Pelco C2601M-C (3/07)

28

C2601M-C (3/07)

The DX4000 remote agent application is designed to run on a computer that uses a Microsoft

®

 Windows

®

 operating system. Refer to 

Specifications on page 36 for a list of supported versions of the Windows operating systems. You can install the remote agent application from 
the resource CD that came with your unit. If you intend to use the remote agent application from several computers on a network, you can copy 
the installation files from the CD onto a network drive from which you can install the application.

After you upgrade the firmware on the DX4000, you must update the remote agent application software as well. Updated software for the 
remote agent application is provided along with firmware updates. These files are provided on a CD-ROM or on a network drive. The names of 
these files will be different for each upgrade. The following files names are examples of what you should find:

•

FirmwareUpgradeUtility.exe: This is the upgrade program that contains the software version number that you will install. The actual file 
name might be different.

•

DVR4000ver.1.0.img: This is the actual updated firmware file that will be copied to the DX4000. The actual file name might be different.

•

DX4000RemoteAgent.exe: This is the installation program for the revised remote agent application that you must install to communicate 
with the upgraded DX4000. The actual file name might be different.