Справочник Пользователя для Intel Server Board S5500HCV S5500HCVR

Модели
S5500HCVR
Скачать
Страница из 192
Functional Architecture 
Intel® Server Boards S5520HC and S5500HCV TPS 
 Revision 
1.2 
Intel order number E39529-009 
 
52 
3.11.1 Video 
Modes 
The integrated video controller supports all standard IBM* VGA modes. The following table 
shows the 2D modes supported for both CRT and LCD. 
Table 14. Video Modes 
2D Video Mode Support 
2D Mode 
8 bpp 
16 bpp 
24 bpp 
32 bpp 
 
Supported Supported Supported Supported 
 
640 x 480 
60, 72, 75, 85 
60, 72, 75, 85 
60, 72, 75, 85 
60, 72, 75, 85 
Refresh Rate 
(Hz) 
Supported Supported Supported Supported 
 
800 x 600 
56, 60, 72, 75, 85 
56, 60, 72, 75, 85 
56, 60, 72, 75, 85 
56, 60, 72, 75, 85 
Refresh Rate 
(Hz) 
Supported Supported Supported Supported 
 
1024 x 768 
60, 70, 75, 85 
60, 70, 75, 85 
60, 70, 75, 85 
60, 70, 75, 85 
Refresh Rate 
(Hz) 
Supported Supported Supported  N/A 
 
1152 x 864 
75 
75 
75 
N/A 
Refresh Rate 
(Hz) 
Supported Supported Supported  N/A 
 
1280 x 1024 
60, 75, 85 
60, 75, 85 
60 
NA 
Refresh Rate 
(Hz) 
Supported Supported Supported  N/A 
 
1440 x 900 
60 
60 
60 
NA 
Refresh Rate 
(Hz) 
Supported Supported 
N/A 
N/A 
 
1600 x 1200 
60. 65, 70, 75, 85 
60. 65, 70 
N/A 
N/A 
Refresh Rate 
(Hz) 
3.11.2 Dual 
Video 
The BIOS supports single- and dual-video modes. The dual-video mode is enabled by default. 
 
In single mode, the onboard video controller is disabled when an add-in video card is 
detected. 
 
In dual mode (enable “Dual Monitor Video” in the BIOS setup), the onboard video 
controller is enabled and is the primary video device. The add-in video card is allocated 
resources and considered the secondary video device.  
 
The BIOS Setup utility provides options on Advanced | PCI Configuration Screen to 
configure the feature as follows: 
Enabled 
(default) 
 
Onboard Video 
Disabled  
Enabled 
Shaded if onboard video is set to "Disabled" 
Dual Monitor Video 
Disabled 
(Default)