Справочник Пользователя для Sony PMW-320K
Thumbnail Operations
89
Chap
te
r 5
Clip
O
per
at
ion
s
s
To delete shot marks
1
Select the frame where you want to
delete a shot mark, and then select
THUMBNAIL > Set Shot Mark >
Delete Shot Mark1 (or Delete Shot
Mark2).
delete a shot mark, and then select
THUMBNAIL > Set Shot Mark >
Delete Shot Mark1 (or Delete Shot
Mark2).
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
knob.
In the shot mark thumbnail screen (see page 88)
or the expand thumbnail screen (see page 87),
you can set the selected frame as the clip index
picture in HD mode.
or the expand thumbnail screen (see page 87),
you can set the selected frame as the clip index
picture in HD mode.
1
Select the thumbnail of the frame that
you want to use as the index picture,
and then select THUMBNAIL >Set
Index Picture.
you want to use as the index picture,
and then select THUMBNAIL >Set
Index Picture.
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
knob.
Note
Even if you set the index picture to a frame that is not the
first frame of a clip, playback of that clip from a
thumbnail screen always begins at the first frame.
first frame of a clip, playback of that clip from a
thumbnail screen always begins at the first frame.
In the expand thumbnail screen (see page 87) and
the shot mark thumbnail screen (see page 88) ,
HD-mode clips can be divided into two clips at
the selected frame.
the shot mark thumbnail screen (see page 88) ,
HD-mode clips can be divided into two clips at
the selected frame.
1
Select the thumbnail of the frame where
you want to divide the clip, and then
select THUMBNAIL >Divide Clip.
you want to divide the clip, and then
select THUMBNAIL >Divide Clip.
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
knob.
The clip is divided at the selected frame, and
two clips with different names are created.
two clips with different names are created.
The first four characters of the clip name are
taken from the name of the original clips, and the
last four characters are new serial numbers.
taken from the name of the original clips, and the
last four characters are new serial numbers.
Example: When the name of a newly recorded
clip would be EFGH0100, and a clip named
ABCD0002 is divided, the names of the two
newly created clips are ABCD0100 and
ABCD0101.
ABCD0002 is divided, the names of the two
newly created clips are ABCD0100 and
ABCD0101.
Note
When there is not enough remaining capacity on the S×S
memory cards to store the divided clips, a message
appears to inform you that there is not enough capacity.
memory cards to store the divided clips, a message
appears to inform you that there is not enough capacity.
Changing Clip Index Pictures
(HD Mode Only)
(HD Mode Only)
Dividing Clips (HD Mode Only)