Справочник Пользователя для Sony CCD TRV 64 E

170 (110)

250 (190)

330 (270)

Before using your camcorder, you first need to charge and install the battery pack.  To
charge the battery pack, use the supplied AC power adaptor.
This camcorder operates with the “InfoLITHIUM“ battery. If you use any other battery
to operate your camcorder, the camcorder may not operate or the battery life may be
shortened.

“InfoLITHIUM“ is a trademark of Sony Corporation.

Charge the battery pack on a flat surface without vibration.

(1) Connect the mains lead to mains.
(2) Align the surface of the battery pack indicated by the z mark with the edge of

the terminal shutter of the AC power adaptor. Then fit and slide the battery
pack in the direction of the arrow. The CHARGE lamp (orange) lights up.
Charging begins.

When the CHARGE lamp goes out, normal charge is completed. For full charge, which
allows you to use the battery longer than usual, leave the battery pack in place for
approximately one hour. Unplug the unit from the mains, then remove the battery pack
and install it into the camcorder. You can also use the battery pack before it is
completely charged.

The time required for a normal charge is indicated in parentheses.
* Approximate minutes to charge an empty battery pack using the supplied AC power

adaptor. (Lower temperatures require a longer charging time.)