Руководство Пользователя для Sony DCR-DVD508
81
Cu
st
st
om
iz
iz
ing y
our c
a
m
co
rde
r
r
• While
is flashing quickly during [ONE
PUSH] setting, continue to frame a white object
until
until
stops flashing.
•
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
keeps
flashing after touching
, set [WHITE BAL.
] to [AUTO].
• If you set [WHITE BAL. ], [SCENE
SELECTION] is automatically set to [AUTO].
z
Tips
• If you change the battery pack with [AUTO]
selected, or take your camcorder outdoors after
inside use (or vice versa), select [AUTO] and
aim your camcorder at a nearby white object for
about 10 seconds for better color balance
adjustment.
inside use (or vice versa), select [AUTO] and
aim your camcorder at a nearby white object for
about 10 seconds for better color balance
adjustment.
• If you change the [SCENE SELECTION]
settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
[OFF].
b
Notes
• Adjust the focus manually ([FOCUS], p. 78)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
in a slowdown of the motion of the image.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 38) is also set to
ON.
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 38) is also set to
ON.
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
NIGHTSHOT] to [OFF].
b
Notes
• Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p. 115).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 78)
• Adjust the focus manually ([FOCUS], p. 78)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
in a slowdown of the motion of the image.
You can record a transition with the
following effects adding to the interval
between scenes.
following effects adding to the interval
between scenes.
1
Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode, then touch
fading in) or [REC] (during fading out)
mode, then touch
.
2
Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
WHITE FADER
BLACK FADER
COLOR SLOW SHTR
(Color Slow Shutter)
(Color Slow Shutter)
SUPER NIGHTSHOT
FADER
STBY
REC
Fading out
Fading in
Continued
,