Справочник Пользователя для Sony DCR-DVD7E

Скачать
Страница из 112
43
Playback on DVD devices
DCR-DVD7E 
2-597-463-11(1)
5
  When you have finished entering 
characters, touch 
 .
The disc title changes to the one you 
entered. 
6
  Touch [END]. 
•  When the disc has a title already set by other 
devices, the 21st and subsequent characters are 
deleted by this operation.
Step 5: Finalizing a disc
1
  Confirm the settings you made in 
steps from 2 to 4 of the “steps for 
finalizing” on the LCD screen.
2
  Touch 
3
  Touch [YES] 
 [YES]. 
Finalizing starts.
•  Do not apply shock or vibration to your 
camcorder, and do not disconnect the AC 
Adaptor during finalizing. 
When you need to disconnect the AC 
Adaptor, make sure that the power of your 
camcorder is set to off and disconnect the 
AC Adaptor after the CHG (charge) lamp 
goes off. Finalizing restarts when you 
connect the AC Adaptor and turn on your 
camcorder again.  
You cannot remove the disc until the 
finalizing operation is completed.
4
  Touch 
, when [Completed] 
appears.
When using a DVD-R/DVD-RW 
(VIDEO mode)/DVD+RW, 
 
 
flashes after finalizing is completed 
when the POWER switch is set to 
 
(Movie) or 
 (Still). Remove the disc 
from your camcorder.
•  When you make the settings to enable a 
creation of a DVD menu on DVD-R/DVD-RW 
(VIDEO mode)/DVD+RW, and finalize the 
disc, the DVD menu appears for a few seconds 
while finalizing the disc.
•  You cannot view a Photomovie with the 
DVD-R/DVD-RW (VIDEO mode) on your 
camcorder.
•  After finalizing a disc, the disc indicator and the 
recording format are displayed as shown below:
DVD-R 
 
DVD-RW (VIDEO mode)
 
DVD-RW (VR mode)
 
DVD+RW