Справочник Пользователя для Sony DCR-PC350E
Getting started
16
Step 2: Charging the
battery pack
battery pack
You can charge the battery by attaching the
“InfoLITHIUM” battery pack (F series) to
your camcorder.
“InfoLITHIUM” battery pack (F series) to
your camcorder.
b
Note
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (F series) (p. 130).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a malfunction.
may cause a malfunction.
• Use a nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.
socket immediately if any malfunction occurs.
1
Attach the charged battery pack to the
camcorder.
camcorder.
1
Slide the BATT
(battery release)
lever in the direction of 1 and push it
down in the direction of 2.
Remove the battery terminal cover when
it lifts up in the direction of 3.
down in the direction of 2.
Remove the battery terminal cover when
it lifts up in the direction of 3.
2
Attach the battery pack with its terminal
side facing your camcorder as shown in
the following illustration and press down
the battery pack until it clicks.
side facing your camcorder as shown in
the following illustration and press down
the battery pack until it clicks.
2
With the v mark on the DC plug facing
up, connect the AC Adaptor to the DC
IN jack on the Handycam Station.
up, connect the AC Adaptor to the DC
IN jack on the Handycam Station.
3
Connect the mains lead to the AC
Adaptor.
Adaptor.
4
Connect the mains lead to the wall
socket.
socket.
To the wall socket
DC plug
Mains lead
AC Adaptor
DC IN jack
Handycam Station
BATT
(battery release) lever
v
mark
DC IN jack