Справочник Пользователя для Sanyo VPC-CA8GX

English

i While the Shooting Screen is active, you can quickly access the screen for 

adjusting the brightness of the monitor (page 140) by pressing the MENU 
button for at least 1 second.

i A target mark & on the monitor 

shows the area the camera is 
focusing on.

i The camera automatically 

determines the correct focus by 
measuring from 9 different focus 
points within the shooting area. If the 
target mark is at a position that is 
different from the point you wish to 
focus on, you can refocus, for 
example, by changing the shooting 
angle.

i The large target mark appears when 

the camera focuses on a wide area 
in the center of the screen.

i By assigning an operation shortcut to an arrow button (page 135), you can 

set the autofocus or the exposure to a fixed setting. When the exposure 
setting is fixed, the 

P icon appears on the monitor; when the autofocus 

setting is fixed, the p icon appears on the monitor.

i When the focus range (page 57) setting is changed, the focus lock is 

released.

i In the NORMAL mode, the shutter speed and aperture settings are shown 

on the Shooting Screen. You can use them as a reference when shooting.

If the camera shake icon > appears...

i During still image shooting, if the shutter speed is slow and the possibility 

that the image may be blurred due to camera shake becomes high, the 
camera shake icon may appear on the monitor. In this case, use a tripod to 
stabilize the camera when shooting, or set the flash operation mode to 
automatic (page 62).

i When shooting with the scene select function set to the fireworks + 

mode, the camera shake icon always appears, but this is normal.

Shutter speed

Aperture

Target mark

Camera shake icon