Справочник Пользователя для Samsung SMX-C20RN

Скачать
Страница из 125
CONNECTING A POWER SOURCE
Be sure to charge the battery pack before you start using your camcorder.
Use the IA-BH130LB battery pack only.
The battery pack may be charged a little at the time of purchase.
We recommend you purchase one or more additional battery packs to allow continuous use of 
your camcorder.


preparation
Remove the battery pack from the camcorder while not in use.
We recommend you charge an additional battery pack in preparation for prolonged outdoor use.
Additional battery packs can be purchased from samsungparts.com. 


Battery pack insertion/ejection
Inserting the battery pack 
Ejecting the battery pack 
1.  Slide the battery slot cover down, and 
then let it open up as shown in the fi gure 
above.
2.  Insert the battery pack into the battery slot 
until it locks.
    Make sure that the SAMSUNG logo 
is facing the LCD display side of the 
camcorder as shown in the fi gure.
3.  Push the battery cover down until it meets 
the camcorder body, then slide it up to 
close.
1.  Slide down, and then open the battery 
slot cover. Then, push the Battery pack 
release
 switch.
Gently push the battery pack release 
switch in the direction shown in the 
fi gure above to eject the battery.
2.  Pull the ejected battery out in the direction 
shown in the fi gure.
3.  Push the battery cover down until it meets 
the camcorder body, then slide it up to 
close.
[Battery pack release] switch
14