Справочник Пользователя для VIZIO VBR 100
VIZIO VBR100 User Manual
34
www.VIZIO.com
Video Problems
Solution
Video is not in high definition.
!
Connect using HDMI or Component. Composite cannot output in high definition.
!
If you have connected the TV to the HDMI or component video jacks, make
sure that you have selected the correct resolution in the setup menu.
sure that you have selected the correct resolution in the setup menu.
!
Almost all commercial DVDs (but not Blu-ray discs) limit component video
resolution to 480p. Upscaling of commercial DVD content is only possible over
HDMI.
resolution to 480p. Upscaling of commercial DVD content is only possible over
HDMI.
!
Your TV is not capable of displaying HD video. Consult your TV documentation.
Video pauses momentarily.
!
This occurs normally between play list chapters or scenes.
!
Video momentarily pauses when your player switches between layers on a
dual-layer disc.
dual-layer disc.
4:3 aspect ratio picture
expands left and right or
screen size is incorrect.
!
Use the TV to change the aspect ratio. See the documentation that came with
the TV.
the TV.
!
If the TV is connected to the component video jacks, set TV Aspect to 4:3 Pan
& Scan.
& Scan.
!
If the TV is connected to HDMI, set the TV Aspect to 16:9.
No sound.
!
Press Volume + (Up) on the TV remote control.
!
Press MUTE on the TV remote control to make sure that MUTE is not ON.
!
Make sure that headphones are not connected to the TV or home theater
system.
system.
!
Check the audio connections of external devices that may be connected.
The screen is black.
!
Make sure the power is ON.
!
Press the input or source button on the TV remote control to select the input
source for the player.
source for the player.
!
Check the connections of external devices that may be connected.
!
Make sure that the disc is not dirty or defective.
!
Press STANDBY/ON, wait five seconds, then press STANDBY/ON again to
reset the player.
reset the player.
PIP does not work with a
Blu-ray Disc.
!
Make sure that the Blu-ray disc allows PIP. See the documentation that came
with the disc.
with the disc.
Cannot change the viewing
angle.
!
Not all discs or scenes are recorded with multiple viewing angles.
Power is ON but there is no
image on the screen.
!
Check the connections of external devices that may be connected.
!
Adjust brightness, contrast, or backlight on the TV.
!
Press the input or source button on the TV remote control to select the input
source for the player.
source for the player.
You see a distorted picture.
!
Press STANDBY/ON, wait five seconds, then press STANDBY/ON again.
!
Check the video cables to make sure they are securely connected.