Справочник Пользователя для Hitachi DZ-BD70A

R

ec

or

din

g

Hints

• You can switch the camcorder to stills recording mode by sliding the 

movie/stills switch to “

” (p.45) even while the power is on.

• For details on screen displays during recording, see p.42.
• You can change the movie recording quality 

• If you cannot record movies, the camcorder does not operate, or it takes too 

long for recording to start, see “Troubleshooting” (p.140).

• About Sleep Mode 

– You can also return to recording pause mode from sleep mode by 

pressing the record button (press again to start recording) or changing the 
media.

– When you return to recording pause mode from sleep mode, the zoom 

position (approx. 1

×), manual focus, exposure, and backlight 

compensation will return to their default settings (p.62, 65–67).

– Regardless of the power save setting (p.60), the camcorder power will 

automatically turn off if standby in sleep mode continues for approx. 30 
minutes. In this case, first turn the power switch to “OFF”, then back to 
“ON”.

• If the automatic lens cover has stopped opening halfway, turn the power 

switch to “OFF”, then turn it to “ON” again.

Notes

• The ACCESS/PC indicator is flashing for a while even after you finish 

recording. While the ACCESS/PC indicator is flashing, do not turn off the 
power or shake the camcorder. Doing so may cause an error in the recorded 
data and you may not be able to play back the data (p.153).

• The minimum recording time for movies is about three seconds (even if you 

press the record button before three recording seconds have elapsed).

• It may not be possible to deactivate the protection on a BD/DVD which was 

protected using another device. In this case, use that same device to 
deactivate the protection.