Справочник Пользователя для Sherwood BDP-904

■

Video output resolution

• The video output resolution differs depending on the Resolution setting.

(For details, refer to “SETTING THE DISPLAY” on page 30.)

*1 : • When the COMPONENT OUTs and the HDMI OUT are connected to your TV, the video signals of 480i(NTSC)(or 576i(PAL)) will be output.

*2 : • When the HDMI OUT is not connected to your TV and the copy protected DVD Videos are played, the video signals of 480p(or 576p) will be

output.

■

Notes :

• If the resolution of video signal to be output from COMPONENT OUTs or HDMI OUT does not match that of your TV, the

picture is not clear, natural or displayed.

Should this happen, first make (composite) video connection between this unit and TV, and select the (composite) VIDEO as
an input source on the TV to display the setting menu, then set the Resolution correctly. (For details on the resolution
acceptable for your TV, refer to its operating instructions.)

• When the HDMI OUT connector is connected to your TV, the TV reports to this unit what resolutions it supports. Therefore, if

you set the Resolution to HDMI Auto, this unit outputs the video signals of the highest resolution acceptable for your TV.

In this case, you cannot select the resolution inacceptable for your TV.

Resolution setting

Video OUTs

(Composite) VIDEO OUT

COMPONENT OUTs

HDMI OUT

HDMI Auto

480i(NTSC)(or 576i(PAL))

1080i

*1,*2

highest resolution

1080p

480i(NTSC)(or 576i(PAL))

1080i

*1,*2

1080p

1080i

480i(NTSC)(or 576i(PAL))

1080i

*1,*2

1080i

720p

480i(NTSC)(or 576i(PAL))

720p

*1,*2

720p

480p

480i(NTSC)(or 576i(PAL))

480p(NTSC)(or 576p(PAL))

480i

480i(NTSC)(or 576i(PAL))

BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 9