Справочник Пользователя для OPPO Digital BDP-93

When the player is turned on for the first time, an Easy Setup Wizard screen will appear.  It is a series of 
guided instructions designed to configure the basic settings for the player.   

To start the Easy Setup Wizard, please follow these steps: 

1)  Turn on the TV. 
2)  Turn on the player. 
3)  Switch the input selection on your TV so that the TV displays the signal from the player.  You 

should see the first step of the Easy Setup Wizard. 

 
If the Easy Setup Wizard has previously been completed or canceled, it will no longer initiate when you turn on 
the player.  Instead, you will see the background screen with the OPPO and Blu-Ray Disc logos.  To access 
Easy Setup Wizard, please press the SETUP button on the remote control, select Device Setup, then Reset 

.  Select “OK” to confirm loading 

the factory default settings.  Once the factory 
default settings are loaded the Easy Setup Wizard 
will appear. 

The first step of the Easy Setup Wizard allows you 
to skip the entire wizard.  If you are familiar with 
setting up audio/video equipment and would like to 
customize the player settings using its Setup Menu, 
you may use the LEFT/RIGHT ARROW buttons to 
select the “Cancel” option, then press the ENTER 
key to exit the Easy Setup Wizard.  Otherwise, to 
continue with the Easy Setup Wizard, select the 
“OK” option and press the ENTER key.  

The player can output video through its HDMI and 
component output terminals.  (Composite video 
output is also available but not recommended.) By 
setting the “Primary Video Output” option, the 
player can optimize video output of the selected 
terminal.  The choices are “HDMI 1”, “HDMI 2” and 
“Analog”.  If you connect the player to the TV using 
an HDMI cable (see Method 1 on page 10, Method 
2 on page 11, Method 4 on page 14, or Method 8 on 
page 18), please select “HDMI 1” or “HDMI 2” 
correspondingly.  If you connect the player to the TV 
using component video cables (see Method 3 on 
page 13), please select “Analog”.   

Please note: The best performance will be provided over the HDMI connection.  Between the two HDMI 
outputs, HDMI 1 should be given priority for use since it benefits from the superior Marvell QDEO video 
processing solution. 

To make your selection, use the UP/DOWN ARROW buttons to highlight the choice, and then press the 
ENTER

 button to go to the next step. 

Easy Setup

The Easy Setup Wizard will help you configure the
basic settings for this player.  More detailed settings
can be accessed at the Setup Menu at any time after
finishing or exiting the wizard.

Press OK to initiate the Easy Setup Wizard, press
Cancel to exit this Wizard immediately.

Step: 1/6

Easy Setup

t

x

e

N

s

u

o

i

v

e

r

P

Step: 2/6

Choose the primary video output that you use.

Better performance will be provided over an HDMI

connection.

Analog

HDMI 1

HDMI 2

Enter