Справочник Пользователя для Lg Electronics BP200

23

C

onnecting

If you want to set the network settings manually, 
use w/s to select [Advanced Setting] on the 

[Network Setting] menu and press ENTER (b).
1.  Use w/s to select [Wireless] and press ENTER 

(b).

[AP List] - Scans all available access points or 
wireless routers within range and display them 
as a list.
[Network name (SSID)] – Your access point 
may not be broadcasting its network name 
(SSID). Check your access point settings through 
your computer and either set your access 
point to broadcast SSID, or manually enter the 
network name in [Network name(SSID)].
[PBC] – If your access point or wireless 
router that supports the PBC (Push Button 
Configuration) method, select this option and 
press the Push Button on your access point 
within 120 counts. You do not need to know the 
network name (SSID) and security code of your 
access point.
[PIN] – If your access point supports the PIN 
Code configuration method based on WPS(Wi-
Fi Protected Setup), select this option and 
note the code number on the screen. And 
then, enter the PIN number on a setting menu 
of your access point to connect. Refer to the 
documentation for your network device.

2.  Follow the instructions of each connection 

method on the screen.

To use PBC and PIN network connection, 
security mode of your access point must be 
set to OPEN or AES.

 

,