Справочник Пользователя для Panasonic KX-TVP200
7.2 UTILITY COMMANDS
154
Installation Manual
to execute this command for all the data selected. When performing this operation, always wait
until the process completion indication appears.
until the process completion indication appears.
WARNING
Never save (back-up) and upload the "Program" without your dealer’s
support.
support.
The memory required to save each data component is indicated below.
Saving items 4-7 below will depend upon the length of the recorded messages.
4. User Prompts-1 (Modified prompts—Modifications to default settings)
5. User Prompts-2 (Modified prompts—Modifications to default settings)
6. Custom Service Menus (Custom service recordings)
7. Personal Greetings (Subscriber greetings)
8. Company Greetings
1.
Type SAVE, then Press RETURN.
2.
Select item to be backed up, then Press RETURN. The size of the file will be displayed.
3.
Press RETURN.
4.
Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode
(Xmodem) and specify the backup filename. The specified data will be transmitted to the
data terminal.
(Xmodem) and specify the backup filename. The specified data will be transmitted to the
data terminal.
Notes
•
The data terminal that you use must be equipped with communications software
that supports the Xmodem file transfer protocol. The command can be cancelled
by Typing [\] before entering the receiving mode. Once the receiving mode has
been selected, use the cancel command of the communication software being
used.
that supports the Xmodem file transfer protocol. The command can be cancelled
by Typing [\] before entering the receiving mode. Once the receiving mode has
been selected, use the cancel command of the communication software being
used.
1. Program—approximately 2 Mbytes (See Warning above)
2. Parameters—approximately 4.4 Mbyte (System Configuration)
3. System Prompts—approximately 23 Mbytes (Do not save—prompts are
saved as defaults in the drive)
2. Parameters—approximately 4.4 Mbyte (System Configuration)
3. System Prompts—approximately 23 Mbytes (Do not save—prompts are
saved as defaults in the drive)
$ SAVE
VPS Disk Data Save (VPS -> PC : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menus
7. Personal Greetings
8. Company Greetings
Selection No. :=
VPS Disk Data Save (VPS -> PC : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menus
7. Personal Greetings
8. Company Greetings
Selection No. :=
To start press 'RETURN'
- - - - - - SAVE Start!!