Справочник Пользователя для Panasonic KX-TVP200
4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION
84
Installation Manual
10.
Start up completed.
a)
The Power Indicator light stops blinking when the start-up has been successful. (The
delay varies according to the system’s condition.)
delay varies according to the system’s condition.)
b)
"**ON LINE MODE**"
is displayed.
c)
System prompt [>] is displayed on the screen. To enter system administration, Press
ENTER. All parameters can be set through the menu-driven programme.
ENTER. All parameters can be set through the menu-driven programme.
When the System Administrator starts operation, the system asks for the terminal
type. By choosing VT100 [2], all parameters can be set through the menu-driven
programme.
type. By choosing VT100 [2], all parameters can be set through the menu-driven
programme.
Please Enter the Number:= [2]
Select [2] because Quick Setup is only available when using a personal computer
that can emulate a VT100 terminal.
that can emulate a VT100 terminal.
11.
Go to the
System Administration Top Menu.
Select [5] and Press ENTER, or Type [3] then
QSET and Press ENTER for Quick Setup and follow the Auto Configuration Instructions.
Set the Rotary Switch to position 0 after initialisation is complete.
The PBX is not programmed properly to support
DPT Integration.
DPT Integration.
Do required integration
programming as described in
this chapter.
programming as described in
this chapter.
TEST: Press the INTERCOM button and then [2065]. If the VPS
answers, you have a DPT connection.
answers, you have a DPT connection.
Table 4-2
Cause
Remedy
Please Select Your Terminal Type.
1. ASCII TERMINAL
2. VT100
Please Enter the Number := ______
1. ASCII TERMINAL
2. VT100
Please Enter the Number := ______