Справочник Пользователя для Lucent Technologies 555-670-111
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
General Feature Use and Telephone Programming
D-34
Telephone Programming
D
Table D-8.
Programming TransTalk MDC 9000 and MDW Telephones
Step
Action
1
Label the button to be
programmed.
programmed.
NOTE:
Skip this step if the feature
will not be programmed onto
a button.
will not be programmed onto
a button.
Remove the clear label cover from the telephone
by pulling up on the tab that extends from the top of
the cover.
by pulling up on the tab that extends from the top of
the cover.
Write the feature name on the card next to the
button to be programmed.
button to be programmed.
Replace the cover.
2
Begin programming.
Press the imprinted Feat button.
Dial
00
.
3
Select the feature or setting.
Press the button you labeled.
NOTE:
If the feature does not get programmed onto
a button, press any line button. This does not
affect the button in any way.
a button, press any line button. This does not
affect the button in any way.
Dial the programming code.
The feature is programmed.
4
End programming.
Press the imprinted Feat button.
Dial
00
.