Справочник Пользователя для Mitel 2700-1398-B1
Mitel NuPoint Messenger Technical Documentation - Release 7.0
DAY = 01 HOUR = 15
The data displayed immediately below refers to the hour between 3 and 4 p.m. on Monday. 00-
14 indicates that data in that column were gathered during the first fifteen minutes of the hour; 15-
29 refers to the second 15-minutes of the hour, etc.
14 indicates that data in that column were gathered during the first fifteen minutes of the hour; 15-
29 refers to the second 15-minutes of the hour, etc.
TOTAL
The data for the four 15-minute intervals. If a hyphen appears, in place of a numerical value, it
means that the data have not yet been gathered. For example, if the report is run at 3:30 p.m.,
and the report interval is 12-15 (noon to 3 p.m.), the entries for hour 15 (3 to 4 p.m.) should be
hyphens.
means that the data have not yet been gathered. For example, if the report is run at 3:30 p.m.,
and the report interval is 12-15 (noon to 3 p.m.), the entries for hour 15 (3 to 4 p.m.) should be
hyphens.
BUSY
The percentage of the hour when all trunks were busy. For example, for Group 1, between 3 and
4 p.m., an ATB condition occurred for 150 seconds out of 3600, or 4% of the time.
4 p.m., an ATB condition occurred for 150 seconds out of 3600, or 4% of the time.
ATB_SEC
The total number of seconds in the time period that an ATB condition occurred.
ATB_CNT
The number of times that an ATB condition occurred. The counter is incremented when an ATB
condition first occurs. The ATB condition must clear, then reoccur, before the counter is
incremented again. For example, if you had an ATB condition that lasted for 3 seconds, the ATB-
SEC counter increases by 3, but the ATB_CNT counter is increased by 1.
condition first occurs. The ATB condition must clear, then reoccur, before the counter is
incremented again. For example, if you had an ATB condition that lasted for 3 seconds, the ATB-
SEC counter increases by 3, but the ATB_CNT counter is increased by 1.
HIGHEST ATB_SEC
The greatest total amount of time during which ATB conditions occurred in a fifteen minute
interval, for the period reported. (It does not mean the longest single interval during which an
ATB occurred.) In other words, this interval is your server’s busiest period during the interval
reported.
interval, for the period reported. (It does not mean the longest single interval during which an
ATB occurred.) In other words, this interval is your server’s busiest period during the interval
reported.
LOWEST ATB_SEC
The least total amount of time during which ATB conditions occurred in a fifteen minute interval,
for the period reported. (It does not mean the shortest single interval during which an ATB
occurred.) This is the period of slowest traffic for your server during the interval reported.
for the period reported. (It does not mean the shortest single interval during which an ATB
occurred.) This is the period of slowest traffic for your server during the interval reported.
Figure 12-3 Sample Group Usage Summary Report
>>> Acme Products System <<<
TOTAL LINE GROUP ATB SUMMARY REPORT
Mon Apr 8, 1995 2:29 pm
Mon Apr 8, 1995 2:29 pm
11/08/95 8hr-17hr day1-day5
GROUP NAME ATB_SEC ATB_CNT PERCENT
1 VMemo 200 100 5 %
2 Pager 100 50 3 %
©Copyright 2002, Mitel Networks Corporation
160