Справочник Пользователя для Mitel 2700-1398-B1
Mitel NuPoint Messenger Technical Documentation - Release 7.0
Dial 9 to get outside access.
9
Wait for second dial tone.
T
Dial pager company system number.
18005552368
Wait two seconds for line to settle.
++
Wait for pager tone.
G
Wait one second for pager tone to finish.
+
Dial individual pager number (or PIN)
458216
Wait for pager tone.
G
Wait for pager tone to finish.
+
Dial display data.
2374444
Enter # to indicate end and make paging terminal hang up.
#
The dial string to accomplish the actions listed above is organized like this:
Pager system dial string
T9T18005552368++G+
Pager number
458216G+
Post-pager number
2374444#
Other information needed for the Mailbox Worksheet is:
Pager frequency
4
Pager interval
10
Message delivery
No
Example 3: DID Display Pager
Jane Jones has a DID display pager. To access this pager manually, you lift the telephone
receiver; wait for a dial tone; dial 9 to get an outside line; listen for a dial tone; dial 1-213-555-
9116; wait for a computer tone; dial the display data, 1-415-555-6644; then dial # to tell the pager
that all the display data has been entered. (This activates the pager). The dial string for these
actions is:
receiver; wait for a dial tone; dial 9 to get an outside line; listen for a dial tone; dial 1-213-555-
9116; wait for a computer tone; dial the display data, 1-415-555-6644; then dial # to tell the pager
that all the display data has been entered. (This activates the pager). The dial string for these
actions is:
Caller Action
Dial String
Wait for dial tone.
T
Dial 9 to get outside access.
9
Wait for second dial tone.
T
Dial individual pager number is.
12135559116
Wait four seconds for line to settle.
++++
Wait for computer (dial) tone.
G
Dial display data.
14155556644
Enter # to indicate that all the data has been entered and make
paging terminal hang up.
paging terminal hang up.
#
When a number outside the PBX is outdialed, followed by a G (Greet), extra + characters (Wait
One Second) should precede the G. This is done because line noise during call setup of
particularly noisy switching equipment could be misinterpreted as a greeting by the server.
One Second) should precede the G. This is done because line noise during call setup of
particularly noisy switching equipment could be misinterpreted as a greeting by the server.
In this case, configuration is more involved, since there is insufficient room in the mailbox Pager
Number parameter to specify the individual pager number
Number parameter to specify the individual pager number
and
the display data, both of which are
unique to this pager. In most installations, however, DID display pagers share a common area
code and prefix (1-213-555, in this case), and configuring the area code and prefix into the outdial
index allows more than one pager to use that pager system.The organization of the dial string is:
code and prefix (1-213-555, in this case), and configuring the area code and prefix into the outdial
index allows more than one pager to use that pager system.The organization of the dial string is:
Pager system dial string
T9T1213555
©Copyright 2002, Mitel Networks Corporation
58