Справочник Пользователя для Toshiba BDX2000KC

You can limit the Internet access from the BD-Live 
functions. (The default setting is “Allow”.)

Follow steps 1 to 4 in “Connection Test” on 
page 46.

Use [K / L] to select “Enable(Custom)”, then 
press [ENTER].

Use [K / L] to select “BD-Live Setting”, then 
press [ENTER].

Use [K / L] to select the desired setting, then 
press [ENTER].

“Allow”:

Internet access is permitted from all BD-Live contents.

Internet access is permitted only for BD-Live contents 
which have content owner certificates. Internet access 
without the certificates are prohibited.

Internet access is prohibited from all BD-Live contents.

Press [RETURN] to go back to the previous 
screen, or press [SETUP] to exit.

Deactivate all the network connection and settings.

Follow steps 1 to 4 in “Connection Test” on 
page 46.

Use [K / L] to select “Disable”, then press 
[ENTER].

Press [RETURN] to go back to the previous 
screen, or press [SETUP] to exit.

You can confirm the current software version.

Follow steps 1 to 3 in “Connection Test” on 
page 46.

Use [K / L] to select “Software Update”, then 
press [ENTER].

Use [K / L] to select “Current Version”, then 
press [ENTER].

You can upgrade the software by using disc.

Use [K / L] to select “Software Update”, then 
press [ENTER].

Use [K / L] to select “Disc Update”, then press 
[ENTER].

Use [K / L] to select “Yes”, then press [ENTER].

• Insert the disc for software update and then press 

[OPEN/CLOSE A].

After completing loading disc, confirmation 
message will appear. Select “Yes” and press 
[ENTER] to start upgrading.

• It may take awhile to complete the updating. (Please 

wait until “100%” appears on the front panel display.)

• The network connection can be reactivated by 

setting the network connection to “Enable(Easy)” or 
“Enable(Custom)”.

• Please visit http://www.toshiba.ca to download the 

latest firmware version.

• You can check the current firmware version in 

“Current Version” in “Software Update” menu.

• Please do not unplug the AC power cord while  

executing the “Disc Update”.

• All settings will remain the same even if you update  

the firmware version.

E5PJ3CD_EN.book  Page 49  Friday, September 18, 2009  2:45 PM