Справочник Пользователя для Toshiba BDX2000KC
8
INTRODUCTION
(*) The unit can also be turned on by pressing these buttons.
1.
Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
must unplug the AC power cord.)
2.
Q indicator
3.
PAUSE F button
4.
STOP C button
5.
6.
OPEN/CLOSE A button*
7.
Disc tray
8.
9.
Infrared sensor window
10. SD card slot
1.
LAN terminal
• Use to connect a network equipment with LAN
• Use to connect a network equipment with LAN
cable.
2.
HDMI OUT jack
• Use to connect a TV with an HDMI compatible port
• Use to connect a TV with an HDMI compatible port
using an HDMI cable.
3.
AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or
• Use to connect a TV, an AV receiver / amplifier or
other device with a composite audio cable.
4.
COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs
• Use to connect a TV with component video inputs
with a component video cable.
5.
AC power cord
• Connect to a standard AC outlet to supply power to
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
6.
Digital / DTS decoder or other device with a digital
audio optical / coaxial input jack with a digital audio
optical / coaxial cable.
audio optical / coaxial input jack with a digital audio
optical / coaxial cable.
7.
VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device
• Use to connect a TV, an AV receiver or other device
with a composite video cable.
Front Panel
ON/STANDBY
OPEN/CLOSE
PAUSE
STOP
PLAY
1
2 3 4 5*
7
8
9
6*
10
Rear Panel
P
R
/C
R
P
B
/C
B
Y
L
R
COMPONENT
VIDEO OUT
AUDIO
VIDEO
COAXIAL
OPTICAL
HDMI
OUT
LAN
DIGITAL OUT
PCM/BITSTREAM
OUT
5
7
6
3
2
1
4
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
damage to the unit.
E5PJ3CD_EN.book Page 8 Friday, September 18, 2009 2:45 PM