Справочник Пользователя для Pelco DD53CBW-X
32
C2445M-E (11/05)
Presets
The Spectra III SE dome system has 150 preset positions. Each of the user-definable presets can
be programmed to use pan, tilt, camera settings, and motion detection. The programmable
presets are numbered 1-32, 35-82, and 100-150.
be programmed to use pan, tilt, camera settings, and motion detection. The programmable
presets are numbered 1-32, 35-82, and 100-150.
The following presets are predefined for specific functions:
Preset
Action
33
Flip command. Pans the dome drive 180 degrees.
34
Pan zero command. Directs the dome drive to the factory-
determined zero reference point.
determined zero reference point.
83-87
Reserved.
88
IR filter IN (color).
89
IR filter OUT (black-white).
90-91
Manual limit stops.
92-93
Scan limit stops.
94
Reserved.
95
Select main programming menu.
96
Stop a scan.
97
Random scanning.
98
Frame scanning.
99
Start auto scanning
Use the following steps to program a preset.
1.
Select the preset number:
a.
Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open.
The cursor moves to the right.
The cursor moves to the right.
b.
Move the joystick up or down to view selections. Press Iris Open to enter
selection.
selection.
2.
Edit the preset label:
a.
Use the joystick to position the cursor beside EDIT PRESET LABEL.
b.
Press Iris Open. The following appears on the monitor:
c.
Use the joystick to position the cursor beside a character. Press Iris Open to enter
selection. To clear a character, position the cursor beside BACKSPACE, and then
press Iris Open.
selection. To clear a character, position the cursor beside BACKSPACE, and then
press Iris Open.
d.
When label is completed, move the cursor to OK. Press Iris Open to return to the
Preset menu.
Preset menu.
PRESET NUMBER
1
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH
-
ELEVATION
-
ZOOM RATIO
-
CUSTOM CAMERA SETTINGS
-
PRESETS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
LABEL FOR ZONE
ZONE NUMBER ------
1234567890
ZONE NUMBER ------
1234567890
OK
ABCDEFGHIJ
CANCEL
KLMNOPQRST
UVWXYZ.,-/
UVWXYZ.,-/
SPACE
abcdefghij
BACKSPACE
klmnopqrst
uvwxyz#&:*
uvwxyz#&:*
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
systems with software version
1.25 or higher.
C2445M-E.pmd
12/14/05, 8:45 AM
32