Справочник Пользователя для Pelco DD53CBW-X
C2445M-E (11/05)
35
NOTE: Motion detection is not guaranteed to catch 100% of activity.
ACTIVATE AUX COMMAND
Motion detection can be programmed to trigger an auxiliary command when motion is detected.
The following are the settings for ACTIVATE AUX:
The following are the settings for ACTIVATE AUX:
OFF (default) Motion detection will not trigger an AUX command.
1
Triggers a command to AUX 1.
2
Triggers a command to AUX 2.
AUX TIME
Aux time is the length of time the auxiliary will remain on after motion is detected.
Available settings for AUX TIME are 1 through 60 seconds.
Available settings for AUX TIME are 1 through 60 seconds.
PRESETS
PRESET NUMBER
1
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH
-
ELEVATION
-
ZOOM RATIO
-
CUSTOM CAMERA SETTINGS
-
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
EXIT
MOTION DETECTION ENABLED
ON
<EDIT DETECTION AREAS>
ACTIVATE AUX
ACTIVATE AUX
OFF
AUX TIME (SECS)
0
MOTION DETECTION
MOTION DETECTION AREAS
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide
C2445M-E.pmd
12/14/05, 8:45 AM
35