Листовка для Pelco E706SS

The E700 Series Sun Shroud provides air space between the shroud and enclosure to protect
from the direct rays of the sun. The sun shroud reduces internal air temperature approximately
10° to 15°F (6° to 10°C).

The E700 Series Sun Visor shields the viewing window from direct sunlight.

E706S

Sun shroud for E706-24 Enclosure

E706SS

Sun shroud for E706-24S Enclosure, stainless steel

E706V

Sun visor for E706-16/E706-24 Enclosure

E706VS

Sun visor for E706-16/E706-24S Enclosure, stainless steel

E708S

Sun shroud for E708-24 Enclosure

E708SS

Sun shroud for E708-24S Enclosure, stainless steel

E708V

Sun visor for E708-24 Enclosure

E708VS

Sun visor for E708-24S/24PS Enclosure, stainless steel

E716S

Sun shroud for E706-16 Enclosure

E716SS

Sun shroud for E706-16S Enclosure, stainless steel

To install the sun visor, perform the following steps:

1.

Remove the end cap from the front of the enclosure and detach the safety wire from the
end cap (see Figure 1).

2.

Attach the sun visor to the end cap with the three 4-40 x .250 machine screws and lock
washers provided, making certain that the safety wire is reattached to the end cap.

3.

Replace the end cap.

4.

Insert the spring clip fasteners in the holes provided on each side of the sun visor and
lock securely.

To install the sun shroud, perform the following steps:

1.

Insert the mounting straps through the holes inside the roof of the sun shroud (see
Figure 1).

2.

Align the sun shroud so that the cutouts allow access to the enclosure’s latches.

3.

Fasten the mounting straps securely around enclosure.

3500 Pelco Way
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120