Справочник Пользователя для Pelco EH4700 Series

 

4

C1405SM-A (5/06)

 

1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not 

be installed where exposed to rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify 

the exposed parts have not been connected to line circuit..

5. The installation method and materials should be capable of supporting four times the weight of the enclosure, pan/tilt, camera and lens 

combination.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is 

present within this unit. 

This symbol indicates that there are important operating and maintenance instructions 
in the literature accompanying this unit.

To reduce the risk of electrical shock, do not remove cover. No user serviceable parts 
inside. Refer servicing to qualified service personnel.

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.