Справочник Пользователя для Pelco es3012
20
Pelco Manual C306M-K (4/05)
AZIMUTH ZERO
Azimuth is the pan angle from 0° to 359°. Azimuth zero is the programmed 0° point that is
normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and
compass readings are based on the set azimuth zero point.
normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and
compass readings are based on the set azimuth zero point.
To set azimuth zero:
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Other.
3.
Press the Iris Open button to enter the Other menu.
4.
Position the cursor (>) beside Az/El/Direction.
5.
Press the Iris Open button to enter the Az/El/Direction menu.
6.
Position the cursor (>) beside Set Azimuth Zero.
7.
Press the Iris Open button. The programming menu for Set Azimuth Zero appears on
the monitor.
the monitor.
8.
Use the joystick to pan the Esprit unit to the desired azimuth zero (0° point) position.
9.
Press the Iris Open button to set the azimuth zero position.
Other Menu
Park Time
0
Pan/Scan Spd
7
Power Up
Default
Pat length
6 min
Spd Profile
50 MPH wind
<Zone Blank>
<Az /El/Direction>
Exit
<Az /El/Direction>
Exit
Az/El/Direction
Set Azimuth Zero
Az/El
Az/El Line
Direction
Direction Line
Disp Duration
Exit
MAIN MENU
<Limit Stop>
<Other>
EXIT
<Other>
EXIT