Справочник Пользователя для Pelco HS6000
2
Pelco Manual C495M-D (12/96)
2.0 SCOPE
The information within this manual covers the installa-
tion of the HS6000 High Security Camera Enclosure.
tion of the HS6000 High Security Camera Enclosure.
3.0 DESCRIPTION
The HS6000 is a high security camera enclosure with
multiple camera capabilities designed for indoor “ceil-
ing mount” installation for such applications as park-
ing garages, hallways, prisons, detention cells, etc.,
requiring maximum protection from vandalism. De-
signed to fit flush to the ceiling, the HS6000 comes
standard with two (2) of its four (4) window ports uti-
lized. Optional windows or blank filler plates may be
ordered as needed. Provisions are made for mounting
a 4" speaker on the bottom of the enclosure. The win-
dow ports provide adequate area for the installation
of infra-red illuminators.
multiple camera capabilities designed for indoor “ceil-
ing mount” installation for such applications as park-
ing garages, hallways, prisons, detention cells, etc.,
requiring maximum protection from vandalism. De-
signed to fit flush to the ceiling, the HS6000 comes
standard with two (2) of its four (4) window ports uti-
lized. Optional windows or blank filler plates may be
ordered as needed. Provisions are made for mounting
a 4" speaker on the bottom of the enclosure. The win-
dow ports provide adequate area for the installation
of infra-red illuminators.
Constructed of heavy gauge steel, the HS6000 will ac-
cept most CCD cameras with fixed focal length lenses
ranging in size from 4 mm to 75 mm. For multi-camera
applications, camera/lens selection is critical and may
require the use of 2-piece cameras. There is no exposed
mounting hardware securing the HS6000 to its mount-
ing surface. Opening the hinged access doors can only
be accomplished with a specially designed tool, elimi-
nating the possibility of the enclosure being opened by
unauthorized personnel.
cept most CCD cameras with fixed focal length lenses
ranging in size from 4 mm to 75 mm. For multi-camera
applications, camera/lens selection is critical and may
require the use of 2-piece cameras. There is no exposed
mounting hardware securing the HS6000 to its mount-
ing surface. Opening the hinged access doors can only
be accomplished with a specially designed tool, elimi-
nating the possibility of the enclosure being opened by
unauthorized personnel.
A factory-installed tamper switch provides added se-
curity.
curity.
Optional accessories include a heater/blower kit in ei-
ther 120 VAC, 230 VAC, or 24 VAC (HB6000, HB6000/
220, HB6024).
ther 120 VAC, 230 VAC, or 24 VAC (HB6000, HB6000/
220, HB6024).
3.1 MODELS
HS6000
HS6000
High security ceiling mount enclo-
sure designed to fit flush with the
ceiling. For use in applications such
as parking garages, hallways, prisons,
detention cells, etc., requiring maxi-
mum protection from vandalism.
Multiple camera capabilities.
sure designed to fit flush with the
ceiling. For use in applications such
as parking garages, hallways, prisons,
detention cells, etc., requiring maxi-
mum protection from vandalism.
Multiple camera capabilities.
3.2 OPTIONS
HB6000
HB6000
120 VAC thermostatically controlled
heater and blower. Heater provides
80 watts of heat and activates ON at
40
heater and blower. Heater provides
80 watts of heat and activates ON at
40
°F; OFF at 60°F. blower provides
internal air circulation and activates
ON at 110
ON at 110
°F; OFF at 80°F.
HB6000/220
Same as HB6000 except 230VAC
operation.
operation.
HB6024
Same as HB6000 except 24 VAC
operation.
operation.
HS600010018
Extra window
HS8000TT
Tilt table assembly
4.0 INSTALLATION
Before installing the HS6000 to a ceiling, make certain
that the mounting surface is able to support the full
weight of the enclosure, plus the camera/lens and any
other options (i.e., speaker, IR illuminators, heater/
blower kits).
that the mounting surface is able to support the full
weight of the enclosure, plus the camera/lens and any
other options (i.e., speaker, IR illuminators, heater/
blower kits).
The lower portion of the enclosure can and should be
removed from the mounting plate to simplify installa-
tion.
removed from the mounting plate to simplify installa-
tion.
NOTE: The eight (8) fasteners required to
secure the HS6000 to a ceiling (minimum 3/8"
diameter recommended) are not supplied.
secure the HS6000 to a ceiling (minimum 3/8"
diameter recommended) are not supplied.
Provisions have been made to attach various
dual duplex conduit boxes to the mounting
plate. The electrical boxes are not supplied.
dual duplex conduit boxes to the mounting
plate. The electrical boxes are not supplied.
4.1 MOUNTING THE UNIT
To mount the enclosure to a ceiling, perform the fol-
lowing steps:
lowing steps:
1.
Open the two (2) access doors by removing four
(4) (two [2] each door) 1/4-20 “Tampruf” screws.
A special socket is provided (fits 1/4" square drive).
The doors hinge down.
(4) (two [2] each door) 1/4-20 “Tampruf” screws.
A special socket is provided (fits 1/4" square drive).
The doors hinge down.
2.
Using the mounting plate as a template, mark and
drill holes in the mounting surface.
drill holes in the mounting surface.
NOTE: The removal of eight (8) 1/4-20
“Tampruf” screws around the perimeter of the
mounting plate will separate it from the rest of
the enclosure.
“Tampruf” screws around the perimeter of the
mounting plate will separate it from the rest of
the enclosure.
3.
Attach the enclosure (mounting plate) with the re-
quired fasteners.
quired fasteners.
4.
Route the required cables through the knockouts.