Листовка для Pelco LD5HDCPG-1

The LD5HD Series Lower Domes for the Heavy-Duty Spectra feature a thick acrylic bubble, barrel
locks, and a trim ring with all-aluminum construction. Models are available with a protective cage.
The cage is designed to increase the protection of the unit’s bubble with minimal obstruction of the
viewed scene. The camera automatically focuses through the cage’s bars at medium to high zoom
setting, eliminating interference.

LD5HDF-1

Lower dome for BB5HDF-1, Heavy-Duty Spectra back box

LD5HDCF-1

Caged lower dome for BB5HDF-1, Heavy-Duty Spectra back box

LD5HDPG-1

Lower dome for BB5HD-PG-1, Heavy-Duty Spectra back box

LD5HDCPG-1

Caged lower dome for BB5HD-PG-1, Heavy-Duty Spectra back box

LD5HDPG-E1

Lower dome for BB5HD-PG-E1, Heavy-Duty Spectra back box

LD5HDCPG-E1

Caged lower dome for BB5HD-PG-E1, Heavy-Duty Spectra back box

The following parts are supplied:

1

Acrylic lower dome with trim ring

1

Acrylic lower dome with trim ring

1

Parts bag

2

Cam lock keys

1

O-ring

1

Tube o-ring lubricant

2

Pop-up lock keys

Refer to Figure 1.

1.

Lightly apply O-ring lubricant to the O-ring.
Install the O-ring in the groove on the trim
ring of the lower dome.

2.

Attach the back box trim leash to a retainer
screw inside the lower dome.

3.

Environmental Models Only – Plug the two-
pin heater connection in the lower dome into
the mating connector in the back box.

4.

Align barrel locks in lower dome with the
holes located on each side of the back box.
Push the lower dome onto the back box.
Press the center pins of the barrel locks in
to secure the lower dome.

Refer to Figure 2.

1.

Attach the back box trim leash to one of
the 8-32 x .275-inch screws that secure
the back box to the mounting ring.

2.

Insert both keys in the barrel locks.
Turn keys clockwise to the unlocked
position. Keys can not be removed
from lock in the unlocked position.

3.

Align ball studs (located on the mount
ring) with the ball stud receivers
(located on the inside of the lower
dome).

4.

Place the lower dome over the back
box. Hold and turn both keys to the
locked position.

BARREL
LOCK

CENTER
PIN

00496

HEATER
CONNECTORS

O-RING

TRIM
LEASH

Figure 1.  Lower Dome Installation,

   Pendant Models

BARREL
KEY LOCK

BALL STUD
RECEIVER

BALL STUD
 

00497

TRIM LEASH

Figure 2.  Lower Dome Installation,

     In-Ceiling Models

3500 Pelco Way
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120