Справочник Пользователя для Pelco C1306M-D (7/09)
4
C1306M-D (7/09)
Getting Started
Thank you for purchasing Pelco’s ExSite
®
EHXM Series explosionproof system. This manual includes instructions for installing all the components
of the system. Once the system installation is complete, refer to the operation/programming manual for instructions on how to operate and
program your system.
program your system.
METHODS OF INSTALLATION
The system can be installed in a standard or inverted position. When installed for inverted operation, the camera orientation and controller
functions are reconfigured for normal operation through the system’s software. Hardware adjustment is not required for inverted operation.
Refer to Figure 1 for installation methods.
functions are reconfigured for normal operation through the system’s software. Hardware adjustment is not required for inverted operation.
Refer to Figure 1 for installation methods.
Figure 1. Methods of Installation
WARNINGS:
•
Total weight of the system is 34.7 lb (15.71 kg). Use caution when lifting and assembling the enclosure component on the power
module. It is recommended that non-slip gloves be worn during installation.
module. It is recommended that non-slip gloves be worn during installation.
•
Do not turn the body of the enclosure more than 200° in either direction or damage to the power module cable may occur.