Справочник Пользователя для Pelco C1456M-D
Pelco Manual C1456M-D (10/98)
37
5.11.4 Reset Camera
Resetting the camera returns the following settings to their defaults.
Setting:
Default:
Auto-focus mode
Auto
Gain/AGC
AGC mode
Auto
Gain
No default setting
Backlight comp
Off
Shutter speed
Auto
Auto-iris
Mode
Auto
Level
Default value depends on type of camera
Peak
Default value depends on type of camera
White balance
Auto white balance
On
R-B white balance
No default setting
M-G white balance
No default setting
Sharpness
Auto sharpness
On
Sharpness
No default setting
When the camera is reset, the following settings are not changed: zoom limit, park
time, auto flip disable, limit stops, and proportional panning.
time, auto flip disable, limit stops, and proportional panning.
Turning off power to the Spectra
®
(Version 3.0) dome does not reset the camera.
Camera settings are retained in memory, and when the power is turned back on,
the settings will be the same as they were when it was turned off.
the settings will be the same as they were when it was turned off.
To reset the camera:
1.
1.
Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET
FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU
ACCESS). The main menu will appear.
FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU
ACCESS). The main menu will appear.
2.
If the cursor (>) is not beside Camera, move the joystick up or down to position
the cursor beside Camera.
the cursor beside Camera.
3.
Press the Iris Open button to enter the Camera submenu.
4.
Move the joystick up or down to position the cursor beside Reset Camera.
5.
Press the Iris Open button to reset the camera.