Справочник Пользователя для Pelco CM9760-MGR
6
ADDENDUM
— (9/02)
3. ON-SCREEN CHARACTER BLINKING
To reduce the possibility of “burning in” characters on a monitor screen, you can make the Camera ID on the monitors blink.
To set the blink time:
1.
With the CM9760-MGR software running, select 9760 SETUP from the tool bar.
2.
In the Configuration Files dialog box, click the System tab.
3.
Find the Miscellaneous window.
4.
In the Ident Blink Timer box enter the number of seconds the camera ID is to be displayed. The off time between the camera ID
appearances will be five to six times longer than the on time. Enter 0 to turn the feature off (camera ID will be displayed all the
time).
appearances will be five to six times longer than the on time. Enter 0 to turn the feature off (camera ID will be displayed all the
time).
5.
Save and exit.
4. COMPATIBILITY WITH CM9760-SAT SATELLITE SWITCHERS
This feature of version 7.8 is supported in the CM9760-SAT (v. 7.8) manual.
The Ident Blink Timer defines the rate
at which the camera ID will blink.
at which the camera ID will blink.
In this example the display will be on
for 20 seconds and off for approxi-
mately 100 seconds.
for 20 seconds and off for approxi-
mately 100 seconds.