Справочник Пользователя для Viper VIPER4706V
43
© 2013 Directed. All rights reserved.
Batter
y
43
Battery Information (Responder LC)
The Responder LC remote control is powered by an internal recharge-
able battery that can be serviced only through an authorized Directed
Electronics dealer. The information and precautions in this section can
help maximize your battery’s life and usage in providing your Re-
sponder LC remote control with many years of trouble free operation.
The battery information for the 1way companion remote control can
be found in the “1-way Companion Remote Control” on page 38
section of this manual.
able battery that can be serviced only through an authorized Directed
Electronics dealer. The information and precautions in this section can
help maximize your battery’s life and usage in providing your Re-
sponder LC remote control with many years of trouble free operation.
The battery information for the 1way companion remote control can
be found in the “1-way Companion Remote Control” on page 38
section of this manual.
Warnings! NEVER use a cable other than the one pro-
vided or plug into an unspecified source. Injury, severe
damage or explosion may occur when connected to
any other products or used in a way not intended.
vided or plug into an unspecified source. Injury, severe
damage or explosion may occur when connected to
any other products or used in a way not intended.
Charging the battery when the temperature is below
32°F (0°C) or above 113°F (45°C) may cause severe
battery damage and/or reduce battery life. Avoid
placing the remote control in areas exposed to ex-
treme cold or heat (direct sunlight) when charging the
battery.
32°F (0°C) or above 113°F (45°C) may cause severe
battery damage and/or reduce battery life. Avoid
placing the remote control in areas exposed to ex-
treme cold or heat (direct sunlight) when charging the
battery.
Low Battery
After a command is performed the Responder LC and 1way com-
panion remote controls check their battery level and, when the level
requires attention, will begin generating alerts. Once the alerts begin
they will continue to command the system for several days but should
be charged at the earliest opportunity or failure to control the system
may occur.
panion remote controls check their battery level and, when the level
requires attention, will begin generating alerts. Once the alerts begin
they will continue to command the system for several days but should
be charged at the earliest opportunity or failure to control the system
may occur.