Справочник Пользователя для Intelligent Motion Systems MDrive34

24 = Single Stack

†

B = 0.0025”

A = 0.005”

C = 0.00125”

Stack Sizes

29 = Linear Actuator
31 = Double Stack

47 = Triple Stack

†

S = Single End
D = Differential

Line Count

100, 200, 250, 400, 500, 1000

Screw Type (Travel/Full Step)

Linear
Actuator†

Example #1: Part Number MDMF3431 is an MDrive34 

Microstepping with Flying Leads, NEMA 34 motor, stack size 31.

 

Example #4: MDMF3431ED500
Adds a 500 line count internal Differential 
Encoder to the part shown in example #1.

Example #2: MDMF3431N
Adds a Control Knob
to the part shown in example #1.

Example #5: MDMF3429LA10.5
MDrive34 Microstepping Linear Actuator
with a 0.005”/Full Step Acme
Screw custom cut to 10.5”.

MAY NOT be combined with other options.
Note: MDrive34 Linear Actuator

Available ONLY in Stack Size 29   

Custom Screw Length

Range 2.0” to 24.0”

Format XX.X

eg. 08.5 for an 8.5” Screw

(6.0” Screw Length Standard)

Example #3: MDMF3431G5
Rounding ratio to the nearest whole number,
the above adds a Planetary Gearbox with
5.18:1 ratio to the part shown in example #1.
Add -F if optional NEMA Flange is desired.

D = 0.000625”
E = 0.0005”

Gearbox Ratio

Rounded to Nearest Whole Number

Control Knob
   The MDrive34 is available with a fac to ry-mount ed rear 

control knob for man u al shaft positioning.

Planetary Gearbox
   Effi cient, low maintenance Planetary Gearbox are of-

fered assembled with the MDrive34. Details inside.

Encoder
   The MDrive34 is available with a factory-mount ed in-

ternal op ti cal en cod er. Available line counts are 100, 
200, 250, 400, 500 or 1000. All en cod ers, except 
the 1000 line, have an in dex mark. Encoders are avail-
able in both single-end and dif fer en tial confi gurations. 

Linear Actuator
   The MDrive34 with long life Acme Screw Linear Actua-

tor is avail able with the following trav el/full step:

Screw A ............. 0.005”/full step
Screw B ............. 0.0025”/full step
Screw C ............. 0.00125”/full step
Screw D ............. 0.000625”/full step
Screw E ............. 0.0005"/full step

   Standard screw length is 6.0” (152.4mm) plus the 

mounting end thread. Cus tom lengths up to 24.0” 
are available without mounting end thread. 

   Linear Actuators are Non-Captive style. Contact the 

factory regarding Captive Shaft or External styles.

Parameter Setup Cable
   A low cost ac ces so ry which eliminates the need for 

users to wire com mu ni ca tions. This 6' (1.8m) cable 
includes built-in logic level shifting circuitry to ac com -
mo date the 3.3v ports on some PCs and plugs in 
easily to con nect a stan dard DB-25 PC par al lel/SPI 
port to the MDrive's 10 pin pin-header (P2). Order 
Cable Part No. MD-CC100-000.

© 2002, 2004 Intelligent Motion Systems, Inc. All Rights Reserved.                

REV121704     

Eastern U.S.
   Phone: 860/295-6102
   Fax: 860/295-6107
   E-mail: etech@imshome.com
Western U.S.
   Phone: 760/966-3162
   Fax: 760/966-3165
   E-mail: wtech@imshome.com

   105 Copperwood Way, Suite H
   Oceanside, CA 92054
   Phone: 760/966-3162
   Fax: 760/966-3165
   E-mail: motors@imshome.com

IMS EUROPE 

   Hahnstrasse 10, VS-Schwenningen
   Germany D-78054
   Phone: +49/7720/94138-0
   Fax: +49/7720/94138-2
   E-mail: info@imseuropehome.com

   4 Quai Des Etroits
   69005 Lyon, France
   Phone: +33/4 7256 5113
   Fax: +33/4 7838 1537
   E-mail: bmartinez@imshome.com

   Phone: +49/35205/4587-8
   Fax: +49/35205/4587-9
   E-mail: hruhland@imshome.com

Product information covered by IMS Product Disclaimer available at www.imshome.com.
Visit the IMS web site for the most up-to-date product information.

Distributed By: