Справочник Пользователя для Mellerware 35800

not cover the heater

5.  Keep electrical appliances out of reach from 

Children or infirm persons. Do not let them 
use the appliances without supervision. 

After the hot-air heater has been placed as 
desired

•  The cable is rolled out
•  The plug is plugged into the socket.
•  The apparatus is switched on with  

the turning knob.

Turn the switch/thermostat turning knob to the 
desired position:

Switch on ‘ ’ for instant, fan-forced radiant 
heat.

Room thermostat
The temperature is continuously variable via 
the switch/thermostat turning knob.

Maximum temperature >> at the ‘I’ + ‘II’ (750 
W + 1250 W = 2000 W)

Minimum temperature >> turn to the left up to 
the anti-freezing level

Adjust the switch to ‘I’ + ‘II’ (2000W) and Max. 
position of thermostat.  

Once a comfortable temperature has been 
reached you turn the knob to the left until the 
heating turns itself off.

The apparatus has been provided with an 
overheating safety that turns off the apparatus 
if there is a technical malfunction or if it is used 
wrongly. If this happens, you must push the 
switch to ‘0’ or pull out the plug. Remove the 
cause or correct the malfunction. After a short 
cooling down period, the overheating safety 
switches on automatically and the apparatus 
can be used again.

Instruction: You must always take care that 
there is sufficient distance for safety (at least 
50cm) between the apparatus and the wall 
or the other objects. The air flow must not be 
impeded by anything.
 
Maintenance

The apparatus does not need any mainte-
nance on the outside. Just clean it with a dry or 
slightly moist cloth. The electric parts may not 
get into touch with water.

_IM.indd   3

12/9/2013   3:44:22 PM